| Audio Performance | Conditions: Unless otherwise specified, all measurements are performed with a 20 Hz to 22 kHz BW limit (no weighting) Frequency Response: 20 Hz to 22 kHz ±1dB Noise (EIN): -126 dBu, 20 kHz BW, max gain, Rs=150 Ω THD+N: <0.02% Dynamic Range: 100 dB (non A-weighted) Crosstalk <-91 dB re 20 dBu @ 20 kHz channel to channel |
| Matrix Mixing Parameters | 29x30 matrix 8 analog in/out 1 speaker out (amplified) 12 expansion bus in/out 4 assignable processing blocks in/out 4 assignable fader blocks in/out 1 telco in/out |
| Assignable Processing Blocks | Filters: All pass Low pass High pass Low shelving High shelving Parametric EQ Notch CD Horn Crossovers: Bessel Butterworth Linkwitz-Riley Compressor Delay; adjustable up to 250 ms |
| Microphone Input Configuration | Input Gain Adjust Mic or Line Level Phantom Power on/off Echo Cancellation on/off Noise Cancellation on/off Filters: All Pass Low Pass High Pass Notch PEQ Mute on/off Chairman Override on/off AGC on/off Automatic Level Control on/off Auto Gate/Manual gate Adaptive Ambient on/off Pre AEC channel |
| Mic/Line Inputs 1-4 | Push-on mini-terminal block, balanced, bridging Impedance: < 5 KΩ Nominal Level: adjustable -56 dBu to 0 dBu (7 dB step coarse gain adjustment) Maximum Level: -65 dBu to +20 dBu Echo Cancellation: 130 ms tail time (works with 12 dB of room gain) Noise Cancellation: 6–15 dB attenuation Phantom Power: 24 V, selectable |
| Line Inputs 5-8 | Push-on mini-terminal block, balanced, bridging Impedance: > 5 KΩ Nominal Level: 0 dBu Maximum Level: 20 dBu |
| Outputs 1-8 | Push-on mini-terminal block, balanced Impedance: < 50 Ω Nominal Level: 0 dBu Maximum Level: 20 dBu |
| Amplifier Output | Binding post connection 10 Watts @ 4 Ω Impedance THD + Noise: <0.5% |
| Telco Line | RJ-11 POTS (plain old telephone service) or analog extension from a PBX A-lead supervision provided |
| | Audio Performance | Conditions: Unless otherwise specified, all measurements are performed with Transmit Limiter and Receive ALC disabled Frequency Response: 250 Hz to 3.3 kHz ±1 dB THD+N: <0.3%, re-max level 250 Hz to 3.3 kHz SNR: >62 dB re max level |
| Telephone Echo Cancellation | Tail Time: 31 ms Null: 55 dB nominal |
| Telephone Noise Cancellation | | Noise Cancellation: 6–15 dB attenuation |
| Expansion Bus In/Out | Proprietary Network RJ-45 (2), 1.9 Mbps Category 5 twisted-pair cable, 200’ maximum cable length between any two Converge Pro devices |
| Ethernet | Autoswitching with Quality of Connection (QoC) 10/100 Ethernet Network Port 10/100 Ethernet PC Port RJ-45 Connectors |
| RS-232 | Serial Command Protocol Only (Console software not supported on RS-232 port) DB-9 female 9,600/19,200/38,400/57,600/115,200 baud rate; 8 bits, 1 stop, no parity Hardware flow control on (default)/off |
| Control/Status | DB-25 female A/B (2) Inputs A/B: active low (pull to ground) Outputs A/B: open collector, 40 VDC max, 40 mA each +3.3 VDC pins (2) (300 mA over-current protected) |
| USB | Version 2.0 Compatible Type: B-connector |
| Configuration & Administration Software | | Convergetm Console |
| Power Input Range | Auto-adjusting 100–240 VAC; 50/60 Hz |
| Power Consumption | | 30W Typical |
| Dimensions (L x D x H) | 17.25” x 10.25” x 1.75” 43.8 x 26 x 4.5 cm |
| Weight | 7.5 lbs/3.3375 kg unit weight 12 lbs/5.4kg shipping weight Operating Temperature 14° F/-10° C to 122° F/50° C ambient room temperature |
| Approvals & Compliance | AES48-2005: AES standard on interconnections — Grounding and EMC practices — Shields of connectors in audio equipment containing active circuitry (self certified) U.S.A. & Canada CSA safety listed EU Countries RoHS compliant WEEE compliant See product manual for additional details |
|