| Audio Performance |
Conditions: Unless otherwise specified, all
measurements are performed with a 20 Hz to 22
kHz BW limit (no weighting)
Frequency Response: 20 Hz to 22 kHz ±1dB
Noise (EIN): -126 dBu, 20 kHz BW, max gain,
Rs=150 Ω
THD+N: <0.02%
Dynamic Range: 100 dB (non A-weighted)
Crosstalk <-91 dB re 20 dBu @ 20 kHz channel
to channel |
| Matrix Mixing Parameters |
29x30 matrix
8 analog in/out
1 speaker out (amplified)
12 expansion bus in/out
4 assignable processing blocks in/out
4 assignable fader blocks in/out
1 telco in/out |
| Assignable Processing Blocks |
Filters:
All pass
Low pass
High pass
Low shelving
High shelving
Parametric EQ
Notch
CD Horn
Crossovers:
Bessel
Butterworth
Linkwitz-Riley
Compressor
Delay; adjustable up to 250 ms |
| Microphone Input Configuration |
Input Gain Adjust
Mic or Line Level
Phantom Power on/off
Echo Cancellation on/off
Noise Cancellation on/off
Filters:
All Pass
Low Pass
High Pass
Notch
PEQ
Mute on/off
Chairman Override on/off
AGC on/off
Automatic Level Control on/off
Auto Gate/Manual gate
Adaptive Ambient on/off
Pre AEC channel |
| Mic/Line Inputs 1-4 |
Push-on mini-terminal block, balanced, bridging
Impedance: < 5 KΩ
Nominal Level: adjustable -56 dBu to 0 dBu
(7 dB step coarse gain adjustment)
Maximum Level: -65 dBu to +20 dBu
Echo Cancellation: 130 ms tail time (works with
12 dB of room gain)
Noise Cancellation: 6–15 dB attenuation
Phantom Power: 24 V, selectable |
| Line Inputs 5-8 |
Push-on mini-terminal block, balanced, bridging
Impedance: > 5 KΩ
Nominal Level: 0 dBu
Maximum Level: 20 dBu |
| Outputs 1-8 |
Push-on mini-terminal block, balanced
Impedance: < 50 Ω
Nominal Level: 0 dBu
Maximum Level: 20 dBu |
| Amplifier Output |
Binding post connection
10 Watts @ 4 Ω Impedance
THD + Noise: <0.5% |
| Telco Line |
RJ-11
POTS (plain old telephone service) or
analog extension from a PBX
A-lead supervision provided |
|
| Audio Performance |
Conditions: Unless otherwise specified,
all measurements are performed with
Transmit Limiter and Receive ALC disabled
Frequency Response: 250 Hz to 3.3 kHz ±1 dB
THD+N: <0.3%, re-max level 250 Hz to 3.3 kHz
SNR: >62 dB re max level |
| Telephone Echo Cancellation |
Tail Time: 31 ms
Null: 55 dB nominal |
| Telephone Noise Cancellation |
| Noise Cancellation: 6–15 dB attenuation |
| Expansion Bus In/Out |
Proprietary Network
RJ-45 (2), 1.9 Mbps
Category 5 twisted-pair cable, 200’ maximum
cable length between any two Converge Pro devices |
| Ethernet |
Autoswitching with Quality of Connection (QoC)
10/100 Ethernet Network Port
10/100 Ethernet PC Port
RJ-45 Connectors |
| RS-232 |
Serial Command Protocol Only (Console
software not supported on RS-232 port)
DB-9 female
9,600/19,200/38,400/57,600/115,200 baud rate;
8 bits, 1 stop, no parity
Hardware flow control on (default)/off |
| Control/Status |
DB-25 female A/B (2)
Inputs A/B: active low (pull to ground)
Outputs A/B: open collector, 40 VDC max,
40 mA each
+3.3 VDC pins (2) (300 mA over-current protected) |
| USB |
Version 2.0 Compatible
Type: B-connector |
| Configuration & Administration Software |
| Convergetm Console |
| Power Input Range |
Auto-adjusting
100–240 VAC; 50/60 Hz |
| Power Consumption |
| 30W Typical |
| Dimensions (L x D x H) |
17.25” x 10.25” x 1.75”
43.8 x 26 x 4.5 cm |
| Weight |
7.5 lbs/3.3375 kg unit weight
12 lbs/5.4kg shipping weight
Operating Temperature
14° F/-10° C to 122° F/50° C ambient room temperature |
| Approvals & Compliance |
AES48-2005: AES standard on interconnections
— Grounding and EMC practices — Shields
of connectors in audio equipment containing
active circuitry (self certified)
U.S.A. & Canada
CSA safety listed
EU Countries
RoHS compliant
WEEE compliant
See product manual for additional details |
|
